Commodore 64 Reloaded
Wireless controller with additional functions for classic computers and consoles with 9-pin connector.
Suitable for, among others:- Commodore 64/128
- Commodore VIC-20
- Commodore 16, 116, Plus/4*
- Amiga/CD32
- Atari 65XE, 130XE, 400, 800
- Atari VCS/2600, 7800, XE
- Atari ST**
- Sinclair ZX Spectrum
- Sega Master System * with adapter
** STF 520/1040 with extension
(Illustration similar)
HMOS version of the 6510 processor (CPU) - for C64, C64 C, SX64
- MOS/CSG 8500
- Commodore part number: 318012-01
- New and unused
(Illustration similar)
New Old Stock
Plug in power supply (prototype?) for Commodore floppy disk drive 1581 with round plug. Inscription: "Plug in power supply for use with floppy disk drive model 1581. Made in Japan."- new
- Commodore P/N: 252359-01
- input: 117 V/60 Hz/18 W
- output: 10 V/0.7 A
- EU plug
- used
- without packaging
(similar image)
New Old Stock
6510 processor (CPU) for Commodore C64, C64 C, SX64
- MOS/CSG 6510
- Commodore part number: 906107-01
- new and unused
(Illustration similar)
- used
- incl. German and English manual (reprint*)
* Reprint by courtesy of Kolff Computer Supplies B.V.
(similar image)New Old Stock
VIC II [PAL] - Video Interface Controller for C64, C64 C and SX64
- MOS/CSG 8565R2
- Datecode: 4793 (calendar week 47 1993)
- New and unused
(Illustration similar)
New Old Stock
EPROM card for four times 8 kB or twice 16 kB using 2732, 2764 or 27128 EPROMs- New and with instructions (German)
- with on/off switch
- with reset button
- ten-way DIP switch for operating mode
(similar to illustration)
New Old Stock
EPROM card kit for for four times 8 kB or twice 16 kB using 2732, 2764 or 27128 EPROMs- New kit with instructions (German)
- with on/off switch
- with reset button
- tenfold DIP switch for operating mode
- REX Part No. 061450-7
(Illustration similar)
- new
- in a 3D printed housing (design by Kaan Akkurt)
- 9-pin D-sub socket
- incl. battery
- supports two fire buttons
Based on a 3D model by ezContents (Cults3D)
(Illustration similar)
New Old Stock
Replacement control board for the following dot matrix printers:
- Blue Chip M 120 NLQ
- Citizen 120D
- Citizen 120D+
- Citizen LSP-10
- Commodore MPS 1220
- Commodore MPS 1250
- Schneider SPrinter 180
TOLB (The Other Little Board) is a replacement for the MOS 8701 clock generator chip used on boards 250425, 250466, 250469 and the C128. Works on the C64 Reloaded too!
Main features:
- PAL version
- Gold plated pins
- Onboard oscillator makes it independent from the C64 crystal and easy to convert a C64 from NTSC to PAL
- Consumes only 9 mA of power (a genuine MOS 8701 consumes 25-30 mA)
- new
- 9-pin connector
New Old Stock
EPROM card for two 2764 EPROMs- New and with instructions (German)
- With reset button
- Switch for operating mode
(Illustration similar)
New Old Stock
The "Sprite und Printmodul 2103" by ak tronic for the Commodore 64/128 offers functions such as sprite editing, printer options and has a reset button.
- New and unused
- Publisher: Commodore
- Language: German
- Paperback: 156 pages
1540/1541 DOS V2.6 LOW C000-DFFF
- MOS 2364-130
- Part No. 325302-01
(Illustration similar)
3D print based on a model by Ingo Soetebier (CC BY 3.0).
- Color: Gray
- Material: PLA
3D print based on a model by Ingo Soetebier (CC BY 3.0).
- Color: Black
- Material: PLA
New Old Stock
EPROM card- With reset button
- Optinal switch mountable
- new
(Illustration similar)
CustomTiming Generator Chip for Commodore C64 and SX64.
- MOS/CSG 8701
(Illustration similar)
New Old Stock
CustomTiming Generator Chip for Commodore C64 and SX64.
- MOS/CSG 8701
- Date code: 1891
Carton box suitable for Commodore 64 C (also called C64 II).
- Very stable with 5 mm thick double corrugated cardboard
- Customization
- Internal dimensions: 42 x 25 x 7 cm
- Color: white
- Fits a C64C without accessories
- Space-saving due to exact fit
- Matching stickers for marking are available separately
(Illustration similar)
Carton box suitable for Commodore 64 (also called bread bin).
- Very stable with 5 mm thick double corrugated cardboard
- Customization
- Internal dimensions: 42 x 21,5 x 8 cm
- Color: white
- fits a C64, C16 or VIC-20 without accessories
- Space-saving due to exact fit
- Matching stickers for marking are available separately
(Illustration similar)
Replica of the demo/utility disk for the Commodore 3.5" disk drive 1581.
Commodore Part Number: 354011-07(Similar picture)
User manual for the "Power Catridge" multifunction cartridge for the Commodore 64
- new (reprint*)
- Language: German
- Format: DIN A5
- Size: 44 pages
* Reprint by courtesy of Kolff Computer Supplies B.V.
(similar image)Manual for the "Power Catridge" multifunction cartridge for the Commodore 64
- new (reprint*)
- Language: English
- Format: DIN A5
- Size: 44 pages
* Reprint by courtesy of Kolff Computer Supplies B.V.
(similar image)- Cartridge-Label (replica)
- for PAL version
Power socket for Commodore 1541 II, 1581, Amiga CD32, Commodore 65
- new
- DIN socket
- 4-pole
- print version
(Similar picture)
Serial Interface Socket for Commodore commodore devices and peripherals
- DIN socket
- 6-pole
- print version
(Similar picture)
Sticker with Commodore 1541 II motif.
- For marking archive boxes, among other things
- 5 pieces
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
Sticker with Commodore 1571 motif.
- For marking archive boxes, among other things
- 5 pieces
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
Sticker with Commodore 1581 motif.
- For marking archive boxes, among other things
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
Sticker with Commodore 64C motif.
- For marking archive boxes, among other things
- 5 pieces
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
Sticker with Commodore 64 motif.
- For marking archive boxes, among other things
- 5 pieces
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
- 12 pins
- 3.96 mm pin pitch
- Gold plated,
- solder lugst
- Insulator color = Blue
- Contact current rating: 3 A
- Contact resistance: 20 mOhms
- Insulator resistance: 5000 MOhms
- Dielectronic Withstanding Voltage: 1000 V AC RMS 60 sec
- Operation temperature: -55 ºC ~ +105 ºC
- Insulator material: PBT, UL94V-0
- Contact material: Brass
- 12 pins
- 3.96 mm pin pitch
- Gold plated,
- Insulator color = black
- Contact current rating: 3 A
- Contact resistance: 20 mOhms
- Insulator resistance: 5000 MOhms
- Dielectronic Withstanding Voltage: 1000 V AC RMS 60 sec
- Operation temperature: -55 ºC ~ +105 ºC
- Insulator material: PBT, UL94V-0
- Contact material: Brass
- Cartridge-Label (replica)
- Cartridge label (replica) suitable for:
- Tape Speedsaver
- Speedmon
- Tape Speedsaver Combi
- Disk Speedloader
- Disk Speedloader Combi
- Tape Queen
- Cartridge-Label (replica)
- "RISKA" version
- Cartridge-Label (replica)
- "TASC" version
- Cartridge-Label (replica)
MicroSD to SD card adapter
(Illustration similar)- second hand
- tested and cleaned
- incl. demo diskette
- in matching cardboard box
- Please note: the drive may show signs of use and slight yellowing
(similar image)
The Open Source Scan Converter (OSSC) is a low-latency video converter for connecting retro video game consoles and home computers to modern displays. It converts analogue RGB or composite video signals to digital format and doubles (or triples) the scanlines of a single frame, if necessary, to create a valid mode for digital TVs or monitors.
The set consists of:- Open Source Scan Converter (OSSC)
- Power supply with plugs for EU, GB, US and AU.
- Remote control
- Instruction manual
- Cardboard box
Quickbyte 2 is an EPROM programmer for the expansion port of the Commodore 64. The software starts automatically after power-on. Besides the programmer software it also contains a machine language monitor and a fast loader for the 1541. The functions are accessible via menus.
Features:- Supported EPROM types:
- 25xx, 2716 to 27512
- and compatible CMOS types
- various EEPROMS (x12016a/x12864)
- integration of further EPROM types possible
- 3 programming algorithms
- reads ROMs of type 23332 and 2364
- reading of modules possible
- with Textool socket
- with german manual
Soundchip for Commodore 64, 128, Max Machine and CBM-II series
- MOS/CSG 6581 R4 AR
- new and unused
New Old Stock
Small version of the Competition Pro joystick (75 % of the original size) in a plastic packaging that can be used as a diskette box (3.5").- 4-way joystick with micro switches
- 2 fire buttons with micro switches
- 9-pin connector
- Cable length: 1.8 m
- Suitable among others for Atari, Amiga, Commodore, Amstrad, Schneider, ZX-Spectrun, MSX
(Illustration similar)