Atari ST/STE/TT
Items 1 - 30 of 146
In stock
Cable for 3.5 floppy disk drives.
- 2 x 34-pin IDC female connectors
- Length: approx. 30 cm
In stock
Cable for 3.5 PC floppy disk drives.
- 2 x 34-pin IDC female connectors
- twisted
- Length: approx. 20 cm
In stock
Cable for 5.25 floppy disk drives.
- 1 x 34-pin IDC female connectors
- 1 x 34-pin (keyed) Card Edge female IDC connectors
- Length: approx. 30 cm
In stock
Universal cable for 3.5 and/or 5.25 inch floppy disk drives.
- 2 x IDC 34-pin female connectors
- 1 x 34-pin (keyed) Card Edge female IDC connectors
In stock
Universal cable for two 3.5 and/or one 5.25 inch floppy disk drives.
- 3 x IDC 34-pin female connectors
- 1 x 34-pin (keyed) Card Edge female IDC connectors
In stock
Universal cable for two 3.5 and/or two 5.25 inch floppy disk drives.
- 3 x IDC 34-pin female connectors
- 2 x 34-pin (keyed) Card Edge female IDC connectors
In stock
Cable for two 3.5 inch floppy disk drives.
- 3 x IDC 34-pin female connectors
In stock
Cable for two 5.25 inch floppy disk drives. (With adapter also suitable for 3.5" floppy drives.)
- 1 x IDC 34-pin female connectors
- 2 x 34-pin (keyed) Card Edge female IDC connectors
- twisted
In stock
Antenna cable for all computers and consoles with RF output.
- new
- Length: 2 meters
(Illustration similar)
In stock
Adapter to connect a AT/XT keyboard to systems with PS/2 connector.
New
Original Atari 1040STFM
Includes:- Original floppy disk drive
- Monitor cable
- Original Atari mouse
- Power cord (Euro plug)
- Tested and in working order
- All original ICs present
- May show slight signs of wear and/or yellowing
In stock
New edition of the classic Atari CX40 joystick – wireless and with 2 adapters.
- new
- Wireless Joystick (red)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
In stock
New edition of the classic Atari CX40 joystick – wireless and with 2 adapters.
- new
- Wireless Joystick (orange)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
In stock
New edition of the classic Atari CX40 joystick – wireless and with 2 adapters.
- new
- Wireless Joystick (blue)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
In stock
New edition of the classic Atari CX40 joystick – wireless and with 2 adapters.
- new
- Wireless Joystick (yellow)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
In stock
New edition of the classic Atari CX40 joystick – wireless and with 2 adapters.
- new
- Wireless Joystick (pink)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
In stock
Extension cable for 9-pin controllers (joystick, gamepad, mouse, etc.)
- new
- 9-pin connector
New
New Old Stock
Replacement control board for the following dot matrix printers:
- Blue Chip M 120 NLQ
- Citizen 120D
- Citizen 120D+
- Citizen LSP-10
- Commodore MPS 1220
- Commodore MPS 1250
- Schneider SPrinter 180
In stock
CF to IDE adapter with 40 pin connector.
- 40-pin male connectors
- Length: approx. 6 x 4.4 cm
In stock
CF to IDE adapter with 40 pin connector.
- 40-pin female connectors
- Size: 6.2 x 5.3 cm
In stock
CF to IDE adapter with 44 pin connector and 2.5" HDD form factor.
- 44-pin female connectors
- for 1 or 2 CF cards
- 2,5 Inch
In stock
D-Sub Cable with 25 pin connectors.
- 1 x 25-pin female connector, 1 x 25-pin male connector
- new and in original packaging
- 1:1 connection
- all pins connected
- Length: approx. 1 m
In stock
Gender Changer to change a DB25 female to a DB25 male
- 25-pole
- Gold plated contacts
(Illustration similar)
In stock
Gender Changer to change a DP9 female to a DP9 male
- 9-pole
- Gold plated contacts
(Illustration similar)
In stock
Gender Changer to change a DP9 male to a DP9 female
- 9-pole
- Gold plated contacts
(Illustration similar)
In stock
Card Edge Connector to male IDC adapter.
- gold-plated contacts
-
(Abbildung ähnlich)
In stock
Card Edge Connector to female IDC adapter.
- gold-plated contacts
-
(Abbildung ähnlich)
In stock
Rubber feet / rubber buffers for Atari ST, STE, Mega ST, TT and Falcon
- Number: 4 pieces
- Color: Black
- self-adhesive
- Suitable for following Atari computers:
- 260ST
- 520ST
- 520STM
- 520ST+
- 520STF
- 520STFM
- 520STE
- 1040STF
- 1040STFM
- 1040STE
- 2080ST
- Mega ST 1, 2, 4 (Mega 1, 2, 4)
- TT030
- Mega ST
- Falcon 030
In stock
2.5" to 3.5" HDD Adapter
- 44- to 40-pin IDE adapter with power connector
- incl. metal bracket and screws
(Illustration similar)
In stock
IDE Cable with 40 pin connectors.
- 3 x 40-pin IDC female connectors
- Length: approx. 45 cm
Items 1 - 30 of 146