CPC6128
- new
- in a 3D printed housing (design by Kaan Akkurt)
- 9-pin D-sub socket
- incl. battery
- supports two fire buttons
- New
(Illustration similar)
Z80B processor (CPU) with 6 MHz for a large number of 8-bit computers.
- NEC D70008AC-6
(Illustration similar)
Scart AV Cable for Amstrad/Schneider CPC computers.
- new
- Length: 1 meter
(Illustration similar)
Scart AV Cable for Amstrad/Schneider CPC computers.
- new
- Length: 2 meter
(Illustration similar)
New Old Stock
Replacement control board for the following dot matrix printers:
- Blue Chip M 120 NLQ
- Citizen 120D
- Citizen 120D+
- Citizen LSP-10
- Commodore MPS 1220
- Commodore MPS 1250
- Schneider SPrinter 180
Z80A processor (CPU) with 4 MHz for a large number of 8-bit computers.
- New Old Stock
- Zilog Z84C0004PSC
(Illustration similar)
- new
- 9-pin connector
- New
- 9-pin plug and socket
- Length: 2.8 meters
- Suitable for all computers and consoles with 9-pin joystick, joypad or mouse connector
Replacement cable for joysticks and joypads with 9-pin connector.
- New
- 9-pin connector
- 9-core cable
- Length: approx. 150 cm
(Illustration similar)
MOLEX-BERG adapter - floppy disk drive power connector
- 1 x MOLEX (male)
- 2 x BERG (female)
- possible applications:
- 3.5" floppy disk drives
- GoTek (floppy emulator)
- HxC (floppy emulator)
- FlexiDrive (floppy emulator)
- KryoFlux (floppy controller)
- SuperCard Pro (floppy controller)
- etc.
(Similar picture)
- new
- connector/socket
- Length: 2 meters
Replacement plug for joysticks and joypads with 9-pin connector.
- New
- Three-part connector housing
- 9 Crimp contacts
(Illustration similar)
MOLEX-BERG adapter - floppy disk drive power connector
- 1 x MOLEX (male)
- 1 x BERG (female)
- possible applications:
- 3.5" floppy disk drives
- GoTek (floppy emulator)
- HxC (floppy emulator)
- FlexiDrive (floppy emulator)
- KryoFlux (floppy controller)
- SuperCard Pro (floppy controller)
- etc.
(Similar picture)
MOLEX Y-cable for connecting 5.25 and 3.5" devices
- 1 x MOLEX (male)
- 1 x MOLEX (female)
- 1 x BERG (female)
- possible applications:
- KryoFlux (floppy controller)
- SuperCard Pro (floppy controller)
- 5.25" floppy disk drives
- 3.5" floppy disk drives
- Hard disk drives
- CD-/DVD-ROM drives
- etc.
(Similar picture)
MOLEX Y-cable for connecting two devices
- 1 x MOLEX (male)
- 2 x MOLEX (female)
- possible applications:
- KryoFlux (floppy controller)
- SuperCard Pro (floppy controller)
- 5.25" floppy disk drives
- Hard disk drives
- CD-/DVD-ROM drives
- etc.
(Similar picture)
- new
- connector/socket
- Length: 1 meter
MicroSD to SD card adapter
(Illustration similar)
The Open Source Scan Converter (OSSC) is a low-latency video converter for connecting retro video game consoles and home computers to modern displays. It converts analogue RGB or composite video signals to digital format and doubles (or triples) the scanlines of a single frame, if necessary, to create a valid mode for digital TVs or monitors.
The set consists of:- Open Source Scan Converter (OSSC)
- Power supply with plugs for EU, GB, US and AU.
- Remote control
- Instruction manual
- Cardboard box
New Old Stock
Small version of the Competition Pro joystick (75 % of the original size) in a plastic packaging that can be used as a diskette box (3.5").- 4-way joystick with micro switches
- 2 fire buttons with micro switches
- 9-pin connector
- Cable length: 1.8 m
- Suitable among others for Atari, Amiga, Commodore, Amstrad, Schneider, ZX-Spectrun, MSX
(Illustration similar)