Atari ST/STE/TT

Cable for 3.5 floppy disk drives.

• 2 x 34-pin IDC female connectors
• Length: approx. 30 cm

Cable for 3.5 PC floppy disk drives.

• 2 x 34-pin IDC female connectors
• twisted
• Length: approx. 20 cm

Cable for 5.25 floppy disk drives.

• 1 x 34-pin IDC female connectors
• 1 x 34-pin (keyed) Card Edge female IDC connectors
• Length: approx. 30 cm

• 2 x IDC 34-pin female connectors
• 1 x 34-pin (keyed) Card Edge female IDC connectors

• 3 x IDC 34-pin female connectors
• 1 x 34-pin (keyed) Card Edge female IDC connectors

• 3 x IDC 34-pin female connectors
• 2 x 34-pin (keyed) Card Edge female IDC connectors

• 3 x IDC 34-pin female connectors

• 1 x IDC 34-pin female connectors
• 2 x 34-pin (keyed) Card Edge female IDC connectors
• twisted

Antenna cable for all computers and consoles with RF output.

• new
• Length: 2 meters

(Illustration similar)

6-pin mini DIN male 5-pin DIN female

Original Atari 1040STFM

• Original floppy disk drive
• Monitor cable
• Original Atari mouse
• Power cord (Euro plug)
• Tested and in working order
• All original ICs present
• May show slight signs of wear and/or yellowing

• new
• Wireless Joystick (red)
• USB-C charging cable (wall charging plug not included)
• DB9 controller adapter
• USB-A controller adapter

• new
• Wireless Joystick (orange)
• USB-C charging cable (wall charging plug not included)
• DB9 controller adapter
• USB-A controller adapter

• new
• Wireless Joystick (blue)
• USB-C charging cable (wall charging plug not included)
• DB9 controller adapter
• USB-A controller adapter

• new
• Wireless Joystick (yellow)
• USB-C charging cable (wall charging plug not included)
• DB9 controller adapter
• USB-A controller adapter

• new
• Wireless Joystick (pink)
• USB-C charging cable (wall charging plug not included)
• DB9 controller adapter
• USB-A controller adapter

• new
• 9-pin connector

New Old Stock

Replacement control board for the following dot matrix printers:

• Blue Chip M 120 NLQ
• Citizen 120D
• Citizen 120D+
• Citizen LSP-10
• Commodore MPS 1220
• Commodore MPS 1250
• Schneider SPrinter 180

CF to IDE adapter with 40 pin connector.

• 40-pin male connectors
• Length: approx. 6 x 4.4 cm

CF to IDE adapter with 40 pin connector.

• 40-pin female connectors
• Size: 6.2 x 5.3 cm

CF to IDE adapter with 44 pin connector and 2.5" HDD form factor.

• 44-pin female connectors
• for 1 or 2 CF cards
• 2,5 Inch

D-Sub Cable with 25 pin connectors.

• 1 x 25-pin female connector, 1 x 25-pin male connector
• new and in original packaging
• 1:1 connection
• all pins connected
• Length: approx. 1 m

Gender Changer to change a DB25 female to a DB25 male

• 25-pole
• Gold plated contacts

(Illustration similar)

Gender Changer to change a DP9 female to a DP9 male

• 9-pole
• Gold plated contacts

(Illustration similar)

Gender Changer to change a DP9 male to a DP9 female

• 9-pole
• Gold plated contacts

(Illustration similar)

Card Edge Connector to male IDC adapter.

• gold-plated contacts
(Abbildung ähnlich)

Card Edge Connector to female IDC adapter.

• gold-plated contacts
(Abbildung ähnlich)

• Number: 4 pieces
• Color: Black
• self-adhesive
• Suitable for following Atari computers:
• 260ST
• 520ST
• 520STM
• 520ST+
• 520STF
• 520STFM
• 520STE
• 1040STF
• 1040STFM
• 1040STE
• 2080ST
• Mega ST 1, 2, 4 (Mega 1, 2, 4)
• TT030
• Mega ST
• Falcon 030

2.5" to 3.5" HDD Adapter

• 44- to 40-pin IDE adapter with power connector
• incl. metal bracket and screws

(Illustration similar)

IDE Cable with 40 pin connectors.

• 3 x 40-pin IDC female connectors
• Length: approx. 45 cm

IDE Cable with 44 pin connectors.

• 2 x 44-pin female connectors
• Length: approx. 20 cm

IDE Cable with 44 pin connectors.

• for 2,5" hard disk drives (HDD)
• 2 x 44-pin female connectors
• Length: approx. 5 cm

IDE UDMA Cable with 40 pin connectors.

• 80-wire ribbon cable
• 2 x 40-pin IDC female connectors
• Length: approx. 20 cm

IDE UDMA Cable with 40 pin connectors.

• 80-wire ribbon cable
• 3 x 40-pin IDC female connectors
• Length: approx. 45 cm

IDE UDMA Cable with 40 pin connectors.

• 80-wire ribbon cable
• 3 x 40-pin IDC female connectors
• Length: approx. 50 cm

• New
• 9-pin plug and socket
• Length: 2.8 meters
• Suitable for all computers and consoles with 9-pin joystick, joypad or mouse connector

Replacement plug for joysticks and joypads with 9-pin connector.

• New
• Three-part connector housing
• 9 Crimp contacts

(Illustration similar)

• new
• in a 3D printed housing (design by Kaan Akkurt)
• 9-pin D-sub socket
• incl. battery
• supports two fire buttons

• new
• IEC 60320, C13/C14
• CEE 7/7 connector (Type-E, SchuKo)
• 3 pole
• Length: 1.5 meters

• Very stable with 5 mm thick double corrugated cardboard
• Customization
• Internal dimensions: 48,5 x 30,5 x 7,5 cm
• Color: white
• fits a Atari ST without accessories
• Space-saving due to exact fit
• Matching stickers for marking are available separately

(Illustration similar)

• Sleeve for 3", 3.5" or 5.25" diskettes
• thinner "slim" variant
• dimensions: 14.3 x 15.2 x 0.9 cm
• with slight bearing marks
• Colour: transparent

MicroSD to SD card adapter

MOLEX-BERG adapter - floppy disk drive power connector

• 1 x MOLEX (male)
• 1 x BERG (female)
• possible applications:
  • 3.5" floppy disk drives
  • GoTek (floppy emulator)
  • HxC (floppy emulator)
  • FlexiDrive (floppy emulator)
  • KryoFlux (floppy controller)
  • SuperCard Pro (floppy controller)
  • etc.

(Similar picture)

MOLEX-BERG adapter - floppy disk drive power connector

• 1 x MOLEX (male)
• 2 x BERG (female)
• possible applications:
  • 3.5" floppy disk drives
  • GoTek (floppy emulator)
  • HxC (floppy emulator)
  • FlexiDrive (floppy emulator)
  • KryoFlux (floppy controller)
  • SuperCard Pro (floppy controller)
  • etc.

(Similar picture)

MOLEX Y-cable for connecting 5.25 and 3.5" devices

• 1 x MOLEX (male)
• 1 x MOLEX (female)
• 1 x BERG (female)
• possible applications:
  • KryoFlux (floppy controller)
  • SuperCard Pro (floppy controller)
  • 5.25" floppy disk drives
  • 3.5" floppy disk drives
  • Hard disk drives
  • CD-/DVD-ROM drives
  • etc.

(Similar picture)

MOLEX Y-cable for connecting two devices

• 1 x MOLEX (male)
• 2 x MOLEX (female)
• possible applications:
  • KryoFlux (floppy controller)
  • SuperCard Pro (floppy controller)
  • 5.25" floppy disk drives
  • Hard disk drives
  • CD-/DVD-ROM drives
  • etc.

(Similar picture)

New Old Stock

PLCC version of the 68000 Processor (CPU), among others for Amiga 600; Atari ST; Apple Macintosh.

• 8 MHz
• 68 Pin PLCC
• new and unused

(Illustration similar)

68000 Processor (CPU) among others for Amiga 500, 500+, 1000; Atari ST; Apple Macintosh.

• New
• 10 MHz
• 64-pin DIP
• different manufacturers (Hitachi, Mostek, Rockwell, Signetics, Thomson/SGS-Thomson, Toshiba)

(Illustration similar)

68000 Processor (CPU) among others for Amiga 500, 500+, 1000; Atari ST; Apple Macintosh.

• New
• 12 MHz
• 64-pin DIP
• different manufacturers (Hitachi, Mostek, Rockwell, Signetics, Thomson/SGS-Thomson, Toshiba)

(Illustration similar)

68000 Processor (CPU) among others for Amiga 500, 500+, 1000; Atari ST; Apple Macintosh.

• 8 MHz
• 64-pin DIP
• different manufacturers (Hitachi, Mostek, Rockwell, Signetics, Thomson/SGS-Thomson, Toshiba)

(Illustration similar)