TI-99/4A

Replacement plug for joysticks and joypads with 9-pin connector.

• New
• Three-part connector housing
• 9 Crimp contacts

(Illustration similar)

• new
• 9-pin connector

MOLEX Y-cable for connecting 5.25 and 3.5" devices

• 1 x MOLEX (male)
• 1 x MOLEX (female)
• 1 x BERG (female)
• possible applications:
  • KryoFlux (floppy controller)
  • SuperCard Pro (floppy controller)
  • 5.25" floppy disk drives
  • 3.5" floppy disk drives
  • Hard disk drives
  • CD-/DVD-ROM drives
  • etc.

(Similar picture)

MOLEX-BERG adapter - floppy disk drive power connector

• 1 x MOLEX (male)
• 2 x BERG (female)
• possible applications:
  • 3.5" floppy disk drives
  • GoTek (floppy emulator)
  • HxC (floppy emulator)
  • FlexiDrive (floppy emulator)
  • KryoFlux (floppy controller)
  • SuperCard Pro (floppy controller)
  • etc.

(Similar picture)

• new
• in a 3D printed housing (design by Kaan Akkurt)
• 9-pin D-sub socket
• incl. battery
• supports two fire buttons

MicroSD to SD card adapter

Antenna cable for all computers and consoles with RF output.

• new
• Length: 2 meters

(Illustration similar)

• New
• 9-pin plug and socket
• Length: 2.8 meters
• Suitable for all computers and consoles with 9-pin joystick, joypad or mouse connector

Replacement cable for joysticks and joypads with 9-pin connector.

• New
• 9-pin connector
• 9-core cable
• Length: approx. 150 cm

(Illustration similar)

MOLEX-BERG adapter - floppy disk drive power connector

• 1 x MOLEX (male)
• 1 x BERG (female)
• possible applications:
  • 3.5" floppy disk drives
  • GoTek (floppy emulator)
  • HxC (floppy emulator)
  • FlexiDrive (floppy emulator)
  • KryoFlux (floppy controller)
  • SuperCard Pro (floppy controller)
  • etc.

(Similar picture)

MOLEX Y-cable for connecting two devices

• 1 x MOLEX (male)
• 2 x MOLEX (female)
• possible applications:
  • KryoFlux (floppy controller)
  • SuperCard Pro (floppy controller)
  • 5.25" floppy disk drives
  • Hard disk drives
  • CD-/DVD-ROM drives
  • etc.

(Similar picture)

• New
• 2 x RCA audio
• 1 x RCA video
• 1 x scart

(Similar picture)

• new
• 9-pin D-sub socket
• incl. battery
• supports two fire buttons

The Open Source Scan Converter (OSSC) is a low-latency video converter for connecting retro video game consoles and home computers to modern displays. It converts analogue RGB or composite video signals to digital format and doubles (or triples) the scanlines of a single frame, if necessary, to create a valid mode for digital TVs or monitors.

• Open Source Scan Converter (OSSC)
• Power supply with plugs for EU, GB, US and AU.
• Remote control
• Instruction manual
• Cardboard box

Converter for connecting devices with NTSC signal to PAL signal and vice versa.

• Support PAL, PAL/M, PAL/N, NTSC3.58, NTSC4.43, SECAM standard format input
• Support PAL and NTSC standard format output
• Housing color: white
• Incl. USB power cable (USB power supply sold separately)

(Similar picture)

Audio cable with 3.5 mm phone connector/audio jack- plug to plug

• neu
• Stereo
• 2 x 3.5 mm jack plug
• Length: 1,5 meter
• Color: black

(Illustration similar)

• New
• 9-pin plug and socket
• Length: 1.8 meters
• Suitable for all computers and consoles with 9-pin joystick, joypad or mouse connector

• Second hand
• 9-pin plug on two sockets
• Length: approx. 28 cm
• Suitable for all computers and consoles with 9-pin joystick, joypad or mouse connection

• New and in original packaging (New Old Stock)
• 9-pin D-Sub-plug
• 2 x 3.5 mm jack plug
• 1 x 2.5 mm jack plug

• New
• 2 x RCA audio
• 1 x RCA video
• 1 x S-VIDEO
• 1 x scart
• IN / OUT switch

(Similar picture)