Controller + Adapters + Cables
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = blue
- Housing color = brass
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = light gray
- Housing color = brass
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = light gray
- Housing color = silver
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = black
- Housing color = silver
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = white
- Housing color = brass
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = white
- Housing color = silver
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- Isolator color = your choice
- Housing color = your choice
(Illustration similar)
New Old Stock
housing for 23-pin D-sub connector.
- 1 x parts set
- DB23 housing
- housing color = light gray
(image similar)
- 31 pins
- 1.25 mm pin spacing
- Location on circuit board: CN13
- Commodore part number: 390492-04
- Molex part number: 39-53-2315
(Image similar)
- 30 pins
- 1.25 mm pin spacing
- Location on circuit board: CN13
- Commodore part number: 390492-02
- Molex part number: 39-53-2305
(Image similar)
New Old Stock
The Commodore 390683-01 adapter connects the Amiga 3000's VDE connector to a 15/31 kHz analog-RGB monitor with a 9-pin connector. Among others, suitable for the Commodore monitor 1950.
- Original Commodore (P/N 390683-01)
- This adapter adapts the pinouts of CGA/EGA to VGA
- It's not a scan converter
- Male DB-9 to High Density Female DB-15
- Tested on a Microway Flicker Fixer and GVP spectrum
(Similar picture)
Cable for 3.5 floppy disk drives.
- 2 x 34-pin IDC female connectors
- Length: approx. 30 cm
Cable for 3.5 PC floppy disk drives.
- 2 x 34-pin IDC female connectors
- twisted
- Length: approx. 20 cm
- 2 x IDC 34-pin female connectors
- 1 x 34-pin (keyed) Card Edge female IDC connectors
- 3 x IDC 34-pin female connectors
- 1 x 34-pin (keyed) Card Edge female IDC connectors
- 3 x IDC 34-pin female connectors
- 1 x IDC 34-pin female connectors
- 2 x 34-pin (keyed) Card Edge female IDC connectors
- twisted
Antenna cable for all computers and consoles with RF output.
- new
- Length: 2 meters
(Illustration similar)
- new
- 9-pin connector