Commodore 64/128
Z80B processor (CPU) with 6 MHz for a large number of 8-bit computers.
- NEC D70008AC-6
(Illustration similar)
Power switch for Commodore 64, 128D, 128DCR, VC20, 1541-II, 1581 and others
- New
(Illustration similar)
- New
- Only suitable for the second generation of the RAMLink with a small power supply connection!
- Euro plug
- Input 100 to 240 V ~
- Output +5 V/1 A and 12 V/0.5 A
- On output side, 4-pin DIN plug
- IEC connector (female)
- with or without power cord
- with packaging
- used
- tested and cleaned
- input: 220 V
- output: +5 V/1 A and 12 V/0.5 A
- EU plug
The Open Source Scan Converter (OSSC) is a low-latency video converter for connecting retro video game consoles and home computers to modern displays. It converts analogue RGB or composite video signals to digital format and doubles (or triples) the scanlines of a single frame, if necessary, to create a valid mode for digital TVs or monitors.
The set consists of:- Open Source Scan Converter (OSSC)
- Power supply with plugs for EU, GB, US and AU.
- Remote control
- Instruction manual
- Cardboard box
- used
- withoutmanual and packaging
Converter for connecting devices with NTSC signal to PAL signal and vice versa.
- Support PAL, PAL/M, PAL/N, NTSC3.58, NTSC4.43, SECAM standard format input
- Support PAL and NTSC standard format output
- Housing color: white
- Incl. USB power cable (USB power supply sold separately)
(Similar picture)
- new
- 14-pin connector
- the cable length can vary
(similar picture)
Adapter to connect IEEE-488 cable to Commodore PET computers and C64/128 as well as VIC-20 with suitable interface.
- 24-pin Card Edge connector (PET)
- 24-pin Centronics connector (IEEE-488)
- also suitable for the IEEE-488 Bus Cartridge from poly.play
(Illustration similar)
PLA Replacement Module w/XC9536 is a substitute for the C64 PLA U17 part no. 906114-01 or 251064-01.
Compatible with C64 mainboards:
- Assy. 326298
- Assy. 250407
- Assy. 250425
- Assy. 250466
- KU-14194
- C64 Reloaded MK1
- SX-64
NOT compatible with C64 mainboard:
- Assy. 250469
The PLAdvanced is a spare part for the PLA (similar to PLAnkton, but is compatible with more devices). Unique is the versatility. In the following Commodore models a PLAdvanced can be used:
- C64, SX64 (außer C64 mit 250469-Platine)
- C16, C116, Plus/4
- 1551
- CBM 6x0
It is a finished PCB, not a kit!
(Illustration similar)
The PLAdvanced+ is a spare part for the PLA (similar to PLAnkton, but is compatible with more devices). Unique is the versatility. In the following Commodore models a PLAdvanced+ can be used:
- C64, SX64 (außer C64 mit 250469-Platine)
- 1551
- CBM 6x0
- CBM 7x0
- C16, C116, Plus/4
- CBM 8296 UE5
- CBM 8296 UE6
- P500 U78
- P500 U88
It is a finished PCB, not a kit!
(Illustration similar)
PLAnkton is the well known and popular substitute for the C64 PLA U17 part no. 906114-01 or 251064-01.
Compatible with C64 mainboards:
- Assy. 326298
- Assy. 250407
- Assy. 250425
- Assy. 250466
- KU-14194
- C64 Reloaded MK1
- SX-64
NOT compatible with C64 mainboard:
- Assy. 250469
PLAnkton is the well known and popular PLA substitute. Here is the new version for the Commodore Plus/4, C16 and C116 designed to replace PLA 251641-02 and for the tight spaces of the Plus/4.
Illustration similar
PLAnkton EV is the well known and popular substitute for the C64 PLA U17 part no. 906114-01 or 251064-01 - but with an exact voltage of 4.3 volts.
Compatible with C64 mainboards:
- Assy. 326298
- Assy. 250407
- Assy. 250425
- Assy. 250466
- KU-14194
- C64 Reloaded MK1
- SX-64
NOT compatible with C64 mainboard:
- Assy. 250469
New Old Stock
Constant fire adapter
- New and in original packaging
New Old Stock
- original boxed
- Box may show slight signs of storage
- used
