IBM PC
Cable for 3.5 floppy disk drives.
- 2 x 34-pin IDC female connectors
- Length: approx. 30 cm
Cable for 3.5 PC floppy disk drives.
- 2 x 34-pin IDC female connectors
- twisted
- Length: approx. 20 cm
- 2 x IDC 34-pin female connectors
- 1 x 34-pin (keyed) Card Edge female IDC connectors
- 3 x IDC 34-pin female connectors
- 1 x 34-pin (keyed) Card Edge female IDC connectors
- 1 x IDC 34-pin female connectors
- 2 x 34-pin (keyed) Card Edge female IDC connectors
- twisted
New Old Stock
Replacement control board for the following dot matrix printers:
- Blue Chip M 120 NLQ
- Citizen 120D
- Citizen 120D+
- Citizen LSP-10
- Commodore MPS 1220
- Commodore MPS 1250
- Schneider SPrinter 180
- new
- Drive for Clik!-40 discs in PCMCIA format
- Incl. instructions and driver CD-ROM
- Incl. one Clik! 40 Pocket Zip disc
- Incl. case for the drive
Attention: Due to the age of the diskettes, 100 % freedom from errors cannot be guaranteed.
(Illustration similar)
CF to IDE adapter with 40 pin connector.
- 40-pin male connectors
- Length: approx. 6 x 4.4 cm
CF to IDE adapter with 40 pin connector.
- 40-pin female connectors
- Size: 6.2 x 5.3 cm
- incl. 25 Retrogames as Download
- 4-way joystick with micro switches
- 2 fire buttons with micro switches
- 2 additional buttons
- Cable length: 1.8 m
- USB
- compatible with Windows, MacOS, Linux, Android, TheC64, TheC64 Mini, The A500, RetroPie
(Picture similar)
New Old Stock
PCI sound card for classic PCs
- New
- Audio chip: EMU10K1 (hardware DSP)
- Channel layout: Real 5.1 surround sound
- Interface: PCI 2.1 (32-bit) Converter (DAC): 16-bit / 48 kHz
- Signal-to-noise ratio: 96 dB (SNR)
- Digital audio output: S/PDIF (AC-3/Dolby Digital pass-through)
- Gaming standards: EAX 1.0, EAX 2.0, DirectSound3D
- MIDI synthesiser: 64-voice hardware wavetable
- Analogue connections: Line-In, Mic-In, Front-Out, Rear-Out, Centre/Sub-Out
- Digital/peripheral connections: S/PDIF-Out, MIDI/Gameport (15-pin)
(Illustration for reference only)
New Old Stock
The CY8CKIT-059 PSoC 5LP is a compact ARM development platform featuring flexibly configurable analogue and digital hardware, as well as a detachable debugger.
- New
- ARM Cortex-M3 core: 32-bit processor running at up to 80 MHz
- PSoC architecture: Programmable digital logic and high-precision analogue blocks
- ‘Snappable’ design: Detachable KitProg debugger/programmer for SWD use
- USB connectivity: Integrated USB-A plug and micro-USB port
- Breadboard-ready: Directly pluggable pin layout for rapid prototyping
- On-board peripherals: Status LED and freely programmable user button
- Software support: Free graphical design via PSoC Creator
D-Sub Cable with 25 pin connectors.
- 1 x 25-pin female connector, 1 x 25-pin male connector
- new and in original packaging
- 1:1 connection
- all pins connected
- Length: approx. 1 m
Gender Changer to change a DB25 female to a DB25 male
- 25-pole
- Gold plated contacts
(Illustration similar)
Gender Changer to change a DP9 female to a DP9 male
- 9-pole
- Gold plated contacts
(Illustration similar)
Gender Changer to change a DP9 male to a DP9 female
- 9-pole
- Gold plated contacts
(Illustration similar)
Five-pin DIN cable for connecting Keyboards.
- New
- 2 x 5-pin DIN plug male
- shielded
- Length: 2 meters
(Illustration similar)
Card Edge Connector to male IDC adapter.
- gold-plated contacts
-
(Abbildung ähnlich)
Card Edge Connector to female IDC adapter.
- gold-plated contacts
-
(Abbildung ähnlich)