Controller + Adapters + Cables
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = blue
- Housing color = brass
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = light gray
- Housing color = brass
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = light gray
- Housing color = silver
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = black
- Housing color = silver
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = white
- Housing color = brass
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- insulator color = white
- Housing color = silver
(Illustration similar)
New Old Stock
23-pin D-Sub connector, for use with external disk drives on the Amiga, among other things.
- 1 x 23-pin male connector
- DB23, solder connector
- 23 gold-plated pins
- Grid size: 1.27 mm
- Isolator color = your choice
- Housing color = your choice
(Illustration similar)
New Old Stock
housing for 23-pin D-sub connector.
- 1 x parts set
- DB23 housing
- housing color = light gray
(image similar)
- 31 pins
- 1.25 mm pin spacing
- Location on circuit board: CN13
- Commodore part number: 390492-04
- Molex part number: 39-53-2315
(Image similar)
- 30 pins
- 1.25 mm pin spacing
- Location on circuit board: CN13
- Commodore part number: 390492-02
- Molex part number: 39-53-2305
(Image similar)
New Old Stock
The Commodore 390683-01 adapter connects the Amiga 3000's VDE connector to a 15/31 kHz analog-RGB monitor with a 9-pin connector. Among others, suitable for the Commodore monitor 1950.
- Original Commodore (P/N 390683-01)
- This adapter adapts the pinouts of CGA/EGA to VGA
- It's not a scan converter
- Male DB-9 to High Density Female DB-15
- Tested on a Microway Flicker Fixer and GVP spectrum
(Similar picture)
Cable for 3.5 floppy disk drives.
- 2 x 34-pin IDC female connectors
- Length: approx. 30 cm
Cable for 3.5 PC floppy disk drives.
- 2 x 34-pin IDC female connectors
- twisted
- Length: approx. 20 cm
Antenna cable for all computers and consoles with RF output.
- new
- Length: 2 meters
(Illustration similar)
- new
- 9-pin connector
- new
- 9-pin connector
- new
- Wireless Joystick (red)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- Wireless Joystick (orange)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- Wireless Joystick (blue)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- Wireless Joystick (yellow)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- Wireless Joystick (pink)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- 9-pin connector
- new
- Wireless Gamepad
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapterr
- new
- 9-pin connector
The Aura Interactor is a wearable force feedback device.
- with adapters for Sega Mega Drive/Genesis and Super Nintendo
- also works with other computers and consoles as well as TVs, video/DVD/BlueRay players, stereo systems and much more
- with US power supply
- new, original packaging and shrink-wrapped
- New
- Length: 1.8 meters
- Suitable for Mega Drive II/Genesis 2
- New
- Length: 1.8 meters
- Suitable for SNES and N64
AV Cable for Philips MSX computers.
- new
- Length: 1.5 meters
(Illustration similar)
Auto switch box to connect a Commodore computer to a coax cable of a TV.
- New
- Original packaging
- Commodore P/N 252652-01
(Similar picture)
- incl. 25 Retrogames as Download
- 4-way joystick with micro switches
- 2 fire buttons with micro switches
- 2 additional buttons
- Cable length: 1.8 m
- USB
- compatible with Windows, MacOS, Linux, Android, TheC64, TheC64 Mini, The A500, RetroPie
(Picture similar)