Commodore 64/128
Antenna cable for all computers and consoles with RF output.
- new
- Length: 2 meters
(Illustration similar)
- new
- 9-pin connector
- new
- Wireless Joystick (red)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- Wireless Joystick (orange)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- Wireless Joystick (blue)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- Wireless Joystick (yellow)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- Wireless Joystick (pink)
- USB-C charging cable (wall charging plug not included)
- DB9 controller adapter
- USB-A controller adapter
- new
- 9-pin connector
Sticker with Commodore 1541 II motif.
- For marking archive boxes, among other things
- 5 pieces
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
Sticker with Commodore 1571 motif.
- For marking archive boxes, among other things
- 5 pieces
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
Sticker with Commodore 1581 motif.
- For marking archive boxes, among other things
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
Sticker with Commodore 64C motif.
- For marking archive boxes, among other things
- 5 pieces
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
Sticker with Commodore 64 motif.
- For marking archive boxes, among other things
- 5 pieces
- Dimensions: 8.5 x 5.5 cm
(Similar to illustration)
- Publisher: Commodore
- Language: English
- Paperback: 18 pages
New Old Stock
Factory new board for 1541II floppy drives.
- New and unused
- ASSY 340803
- Rev. 9
- fully assembled and functional
- With burn-in test
Replica of the demo/utility disk for the Commodore 3.5" disk drive 1581.
Commodore Part Number: 354011-07(Similar picture)
Auto switch box to connect a Commodore computer to a coax cable of a TV.
- New
- Original packaging
- Commodore P/N 252652-01
(Similar picture)
- Publisher: Commodore
- Language: German
- Paperback: 156 pages
- Publisher: Commodore
- Language: German
- Paperback: 18 pages
- original Commodore 314061-02
- only Userport cartridge, without ROM cartridge and Cable
(similar image)
- used
- with Manual (German, reprint)
RAM for various home computers and hardware such as Commodore REU 1700, 1750 und 1764.
- Storage Type: DRAM
- Memory organization: 256 kB x 1
- Storage capacity 256 kB
- Housing: DIP16
- Access time: 150 ns
- Operating voltage: 5V
Used in:
- Commodore REU 1764 (8 pieces)
- Commodore REU 1750 (16 pieces)
- Upgrade REU 1700 and 1750
(Illustration similar)
RAM for various home computers and hardware such as Commodore 64, Plus/4 and REU 1700; Atari 800XL; Tandy TRS-80 Color Computer 2; Acorn Electron
- Storage Type: DRAM KM4164B-10
- Memory organization: 64 kB x 1
- Storage capacity: 64 kB
- Access Time: 100 ns
- Housing: DIP16
- Operating voltage: 5V
Used in:
- older C64 boards: 8 pieces
- Plus/4: 8 pieces
- REU 1700: 16 pieces
- Acorn Electron: 4 pieces
(Illustration similar)
RAM for various home computers and hardware such as Commodore 64, Plus/4 and REU 1700; Atari 800XL; Tandy TRS-80 Color Computer 2; Acorn Electron
- Storage Type: DRAM MN4145P-12A
- Memory organization: 64 kB x 1
- Storage capacity: 64 kB
- Access Time: 120 ns
- Housing: DIP16
- Operating voltage: 5V
Used in:
- older C64 boards: 8 pieces
- Plus/4: 8 pieces
- REU 1700: 16 pieces
- Acorn Electron: 4 pieces
(Illustration similar)
RAM for various home computers and hardware such as Commodore 64, Plus/4 and REU 1700; Atari 800XL; Tandy TRS-80 Color Computer 2; Acorn Electron
- Storage Type: DRAM KM4164-12
- Memory organization: 64 kB x 1
- Storage capacity: 64 kB
- Access Time: 120 ns
- Housing: DIP16
- Operating voltage: 5V
Used in:
- older C64 boards: 8 pieces
- Plus/4: 8 pieces
- REU 1700: 16 pieces
- Acorn Electron: 4 pieces
(Illustration similar)
RAM for various home computers and hardware such as Commodore 64, Plus/4 and REU 1700; Atari 800XL; Tandy TRS-80 Color Computer 2; Acorn Electron
- Storage Type: DRAM D4145C-2
- Memory organization: 64 kB x 1
- Storage capacity: 64 kB
- Access Time: 200 ns
- Housing: DIP16
- Operating voltage: 5V
Used in:
- older C64 boards: 8 pieces
- Plus/4: 8 pieces
- REU 1700: 16 pieces
- Acorn Electron: 4 pieces
(Illustration similar)
RAM for various home computers and hardware such as Commodore 64, 16/116 and 128/128D.
- Storage Type: DRAM
- Memory organization: 64 kB x 4
- Storage capacity 256 kB
- Housing: DIP18
- Access time: 100 ns
- Operating voltage: 5V
Used in:
- in newer C64 versions (2 pieces)
- to upgrade the memory of C16 and C116
- to upgrade the C128 VDC RAM
(Illustration similar)
New Old Stock
EPROM card for two 2764 EPROMs- New and with instructions (German)
- With reset button
- Switch for operating mode
(Illustration similar)
New Old Stock
EPROM card- With reset button
- Optinal switch mountable
- new
(Illustration similar)
- 44 pins
- 2.54 mm pin pitch
- Insulator:Glass filled PBT 94v-0, Black
- Contacts: Brass or Phosphor Bronze
- Plating: Contact Gold plated, Dip Tin plated
- Contact resistance: 20 mO max. at DC 100 mA
- Insulation resistance: 1000 mO min. at 500V DC
- Withstanding Voltage: 1000 V AC/rms 50 Hz for 1 min
- Current rating: 2 AMP
- Operating temperature: -55 to +105 °C.
- Soldering Temperature: 260 °C, 6 s max.
Fast Load is a C64 plug-in cartridge with quick-loading function for floppy disk drives and SD2IEC and offers numerous additional functions (Epyx Fast Load compatible).
The most important functions are clearly summarized on the back of the cartridge. Detailed instructions are included.
Delivery:
- "Fast Load" cartridge
- Manual (English/German)
- Card box
- Stickers
Rubber feet / rubber buffers for CMD hardware
- Number: 4 pieces
- Color: black
- self-adhesive
- Suitable for:
- SuperCPU
- RAMLink
- FD-2000
- FD-4000
- HD Series
(Illustration similar)
Rubber feet / rubber buffers for the Commodore floppy disk drives
- Number: 4 pieces
- Color: white
- self-adhesive
- Suitable for:
- Commodore 1541 II
- Commodore 1571
- Commodore 1581
(Illustration similar)
Rubber feet / rubber buffers for the Commodore floppy disk drives
- Number: 4 pieces
- Color: Black
- self-adhesive
- Suitable for:
- Commodore 1540
- Commodore 1541
- Commodore 1551
- Commodore 1570
- Commodore SFD1001
- Commodore SFD1002
(Illustration similar)
Rubber feet / rubber buffers for the Commodore computers
- Number: 4 pieces
- Color: grey
- self-adhesive
- Suitable for:
- C64, VC-20 and C16 (Breadbox) - needs 4 pieces
- C64 C (also called C64 II) - needs 2 pieces
- C128 needs 4 pieces
- C128D (plastic) needs 6 pieces
- C128D CR (sheet metal) needs 4 pieces
- C116 and Plus/4 needs 4 pieces
(Illustration similar)
Rubber feet / rubber buffers for the Commodore computers
- Number: 4 pieces
- Color: red
- self-adhesive
- Suitable for:
- C64, VC-20 and C16 (Breadbox) - needs 4 pieces
- C64 C (also called C64 II) - needs 2 pieces
- C128 needs 4 pieces
- C128D (plastic) needs 6 pieces
- C128D CR (sheet metal) needs 4 pieces
- C116 and Plus/4 needs 4 pieces
(Illustration similar)
Rubber feet/rubber buffers for the Commodore computers
- Number: 4 pieces
- Color: Black
- self-adhesive
- Suitable for:
- C64, VC-20 and C16 (Breadbox) - needs 4 pieces
- C64 C (also called C64 II) - needs 2 pieces
- C128 needs 4 pieces
- C128D (plastic) needs 6 pieces
- C128D CR (sheet metal) needs 4 pieces
- C116 and Plus/4 needs 4 pieces
(Illustration similar)
Rubber feet/rubber buffers for the Commodore computers
- Number: 4 pieces
- Color: transparent
- self-adhesive
- Suitable for:
- C64, VC-20 and C16 (Breadbox) - needs 4 pieces
- C64 C (also called C64 II) - needs 2 pieces
- C128 needs 4 pieces
- C128D (plastic) needs 6 pieces
- C128D CR (sheet metal) needs 4 pieces
- C116 and Plus/4 needs 4 pieces
(Illustration similar)
Rubber feet / rubber buffers for Commodore computers
- Quantity: 4 pieces
- Color: white
- self-adhesive
- Suitable for:
- C64, VC-20 and C16 (Breadbox) - needs 4 pieces
- C64 C (also called C64 II) - needs 2 pieces
- C128 needs 4 pieces
- C128D (plastic) needs 6 pieces
- C128D CR (sheet metal) needs 4 pieces
- C116 and Plus/4 needs 4 pieces
(Illustration similar)