various manufacturers
Brush set for cleaning or dedusting as well as for applying cleaner or bleaching agent.
- Contents: 3 brushes (1", 1.5" and 2" wide)
New Old Stock
Adapter for connecting a PS/2 mouse to a USB port.
PS/2 female to USB A male
(Image for illustrative purposes only)
(Illustration similar)
AV Cable for MSX2, MSX2+, and TurboR computers.
- new
- Length: 1.5 meters
(Illustration similar)
Belt for the extern disk drive SF354 for Atari ST computers.
- New
- Illustration similar
Two Belts for the cassette drive in Spectrum +2 (grey version)
- New
- Illustration similar
Belt for the disk drive in the Panasonic FS-A1F MSX computer.
- New
- Illustration similar
Two Belts for the cassette drive in Spectrum +2 (grey version)
- New
- Illustration similar
S-Video cable
- New
- Length: 2 meters
- 4-pin mini DIN plug
- Gold-plated connector
(Illustration similar)
- 1 x SATA connector
- 1 x IDE 44-pin male connector (2.5")
- cannot be used reversely
Scart AV Cable for Amstrad/Schneider CPC computers.
- new
- Length: 1 meter
(Illustration similar)
Scart AV Cable for Amstrad/Schneider CPC computers.
- new
- Length: 2 meter
(Illustration similar)
- New
- Length: 1.8 meters
- Not suitable for Mega Drive II
- New
- Length: 1.8 meters
- Not suitable for Mega Drive I
- New
- Length: 1.8 meters
- Suitable for SNES und N64
Safety goggles for handling cleaners and bleach.
- Size: 15 cm wide, 5 cm high
- 3-fold length-adjustable temples, up to approx. 10.5 cm
- Weight: approx. 21 g
- Color: Black
- with front and side protection
(Picture similar)
Flocked protective gloves for handling cleaners and bleach.
- Size: L
- Material: natural rubber, coated with flock (cotton dust)
- Standards:
- EN 420 (General requirements for protective gloves)
- EN388 (protection against mechanical hazards)
- EN374-2 (protection against chemical substances)
(Picture similar)
New Old Stock
Terminating resistor for third-generation SCSI bus systems (SCSI-3/Ultra SCSI).
High-density 68-pin male.
(Illustration similar)
Serial Port Adapter to change a DB25 to a DB9 port
- 1 x DB9 male connector, 1 x DB25 male connector
- Gold plated contacts
- shielded
(Illustration similar)
Serial Port Adapter to change a DB9 male serial port to a DB25 serial
- 1 x DB9 female connector, 1 x DB25 male connector
- Gold plated contacts
- shielded
(Illustration similar)
New Old Stock
Adapter for connecting a Serial mouse to a PS/2 port.
Serial DSub 9 male to PS/2 male
(Image for illustrative purposes only)
- Used
- 6 pins
- Length: approx. 180 cm
- For connecting Commodore computers with peripherals such as floppy drives, printers, and others.
- Material: 100% acrylic
- Hand wash
- Officially licensed
3rd-party Super Nintendo controller
- new
- suitable for SuperPad64
- New
- Color: Red/Silver
- With thread, mounting nut and locking ring
- With soldering lugs
- Button 1-pin
- Button type: No contact
- Max. 250 V/0.5 A
- Dimensions: 27.5 x 10 x 10 mm (L/W/H)
- Installation depth: 6 mm
- Mounting hole: 6.5 to 8 mm
- New
- Color: Yellow/Silver
- With thread, mounting nut and locking ring
- With soldering lugs
- Button 1-pin
- Button type: No contact
- Max. 250 V/0.5 A
- Dimensions: 27.5 x 10 x 10 mm (L/W/H)
- Installation depth: 6 mm
- Mounting hole: 6.5 to 8 mm
- New
- Color: Green/Silver
- With thread, mounting nut and locking ring
- With soldering lugs
- Button 1-pin
- Button type: No contact
- Max. 250 V/0.5 A
- Dimensions: 27.5 x 10 x 10 mm (L/W/H)
- Installation depth: 6 mm
- Mounting hole: 6.5 to 8 mm
- New
- Color: Red/Silver
- With thread, mounting nut and locking ring
- With soldering lugs
- Button 1-pin
- Button type: No contact
- Max. 250 V/0.5 A
- Dimensions: 27.5 x 10 x 10 mm (L/W/H)
- Installation depth: 6 mm
- Mounting hole: 6.5 to 8 mm
- New
- Color: Black/Silver
- With thread, mounting nut and locking ring
- With soldering lugs
- Button 1-pin
- Button type: No contact
- Max. 250 V/0.5 A
- Dimensions: 27.5 x 10 x 10 mm (L/W/H)
- Installation depth: 6 mm
- Mounting hole: 6.5 to 8 mm
- New
- Color: White/Silver
- With thread, mounting nut and locking ring
- With soldering lugs
- Button 1-pin
- Button type: No contact
- Max. 250 V/0.5 A
- Dimensions: 27.5 x 10 x 10 mm (L/W/H)
- Installation depth: 6 mm
- Mounting hole: 6.5 to 8 mm
USB 2.0 connection cable type A to type A
- neu
- 2 x USB Plug A
- Length: 1 meter
- Color: grey
(Illustration similar)
USB connection cable type A to type B
- neu
- 1 x USB Plug A
- 1 x USB Plug B
- Length: 1,3 meter
- Color: grey
(Illustration similar)
USB connection cable type A to type B
- neu
- 1 x USB Plug A
- 1 x USB Plug B
- Length: 1,5 meter
- Color: grey
(Illustration similar)
USB connection cable type A to type B
- neu
- 1 x USB Plug A
- 1 x USB Plug B
- Length: 1,8 meter
- Color: black
(Illustration similar)
USB connection cable type A to type B
- neu
- 1 x USB Plug A
- 1 x USB Plug B
- Length: 1,8 meter
- Color: grey
(Illustration similar)
USB connection cable type B to type B
- neu
- 2 x USB Plug B
- Length: 1,8 meter
- Color: grey
(Illustration similar)
New Old Stock
Adapter for connecting a USB mouse to a PS/2 port.
USB female to PS/2 male
(Image for illustrative purposes only)
Adapter for connecting Micro SD cards to the USB port
(Illustration similar)